Fabricado en Canadá

La increíble potencia de sonido del xtSA comienza con tres voces distintas: guitarra eléctrica, guitarra acústica y sintetizador.

The xtSA delivers big-time electric sounds via the Godin humbucker-single-humbucker pickup configuration and thanks to a special 5-way switch setup, extra meaty humbucker tones co-exist with glassy split-coil sounds in the second and forth positions. Turn down the electric output and raise the volume on the LR Baggs transducer saddles and the xtSA becomes an incredibly authentic-sounding ‘acoustic’ guitar. The acoustic voice of the xtSA is enhanced by an onboard preamp with a three-way graphic EQ. The two outputs are set up so that the electric and acoustic voices can be blended while using a single patch cord or at the amp/mixer via both outputs. Also, the xtSA’s synth tracking, which simply put, is the best in the business. As with all of Godin synth-ready instruments, a built-in 13-pin connector provides direct access to all Roland™ GR-Series synths as well as most other 13-pin devices. All of this sound power would be a lot less interesting if the guitar didn’t feel great but the xtSA sure does, thanks to the same 25½” scale and mahogany neck used on the Godin LGX-SA flagship guitar.

The Richlite® fingerboard is shaped with Godin’s ergocut technique and equipped with medium jumbo frets. The body is made of a silver leaf maple center with poplar wings and is topped with a Premium grade veneer of highly figured Koa.

Especificaciones
Arriba: Premium grade veneer of Figured Koa
Cuerpo: Centro de arce hoja de plata con alas de álamo
Puente y Cordal: Puente de trémolo flotante
Electrónica de puente: Puente de trémolo con selletas transductoras LR Baggs y salida de 13 polos, salida acústica
Pastilla de puente: Godin Custom Doble Bobina
Pastilla central: Bobina simple Godin
Pastilla de mástil: Godin a medida Doble bobina
Controles: 3 salidas: eléctrica, acústica, preamplificador personalizado con ecualizador de 3 bandas, mezcla, volumen de sintetizador, tono, volumen
Cuello: Caoba
Diapasón: Richlite
Radio del diapasón: 16" (406,4 mm)
Trastes: 22
Ratio del cabezal de la máquina: 18:1
Tipo de tuerca: Graphtech
Ancho de tuerca: 1,72" (43,688 mm)
Longitud de escala: 25,5" (647,7 mm)
Calibres de cuerda: .010 .013 .017 .026 .036 .046
Juego de cuerdas: E10
Acabado: Natural Koa, Alto brillo

Bolsa para guitarra Godin incluida