Sound Better
Pickups need to be balanced and adjusted accordingly for the optimum output. The height of the strings on an acoustic will effect the overal tone and volume. The break angle of string over saddle will also effect the volume, tone and energy that remains in the string. A poorly cut nut will sap tone and can cause various rattles and buzzes.

Feel Better
Mass produced guitars always suffer to a varying degree from sharp burs on the edges of the frets where they have been cut off in production. By spending time "softening" these edges it makes a massive difference to the feel of the guitar. From a sharp, scratchy feel when moving your hand up and down the fretboard to a guitar that feels like it has been played in for years.

Play Better
It is rare that there isn't a marked improvement on the playability of a guitar once it has been through our workshop. No matter what you pay whether it be £119 or £1119 every instrument new or used leaves our workshop fit to be played by beginner or professional. Of course, if you have a preference then the guitar will be setup to play just how you like it. I want the guitar to play like your guitar.

Stay In Tune - Longer
A bold claim? Not really! We pay close attention to the nut of the guitar by default when setting up our guitars. If the nut is cut too tight on the strings then they pinch (that clicky sound when you tune or detune). The clicking noise is the sound of the string pinging into position. In other words it is not moving freely so when you go to tune your guitar it will be at one pitch but when you bend the string or use the tremolo the string "pings" into its actual pitch - now out of tune! People blame the tremolo for poor tuning on guitars but it is actually usually the nut which is to blame.

Look Better
Thats right! Our guitars even look better than guitars bought from any other store!! A visual check is made on every guitar. We are always looking for cosmetic issues and will take the price into account. I have rejected "flame top" guitars with not enough flame, guitars with poorly aligned inlays, buff marks, dinks and dents - most scenarios have occurred over the years - all rejected on behalf of the customer. On guitars which may have been poorly buffed at the factory we even have a T-Cut which helps remove excess scratching to give surfaces like black gloss a wonderful pristine sheen. Every guitar we sell is polished of course and the only dust you will see on the guitar will have landed on it from the box we put it in for packing!